The Water-Wall Barrier is a durable side protective temporary crash barrier system that can be used in many situations; from protecting the public surrounding a construction site, to work-zone safety on roads and highways.
The Water-Wall can quickly and easily connect directly to the SLED end treatment which negates the need to shield or flare the end of the barrier. For added privacy and security, the Water-Wall can be equipped with a plastic or chain-link fence (with extended connection pins).
Features:
Durable polyethylene plastic minimizes cracking and breaking
Approximately 80 lbs. each (empty weight)
Water Filled Barriers Weigh approx. 1,100 lbs filled with water
Molded through holes eliminate bowing when filled with water
Double wall knuckle design minimizes breakage at hinge points
Hinge design allows for a 30° pivot between section
Large 8" fill hole speeds filling process, includes twist-lock plastic cap
New tamper resistant, corner offset drain plug with coarse buttress thread - screws in or out in only 2.5 turns
Includes one steel connection pin that allows sections to be locked together
Forklift/Pallet Jack slots at bottom allow for easy movement and transport
Testing Qualifications:
NCHRP 350-TL-1 Longitudial Barrier - Test Level 1 temporary barricade with an impact speed of under 31.9 mph
NCHRP 350-TL-2 Longitudial Barricade - Test Level 2 longitudial barricade with an impact speed of under 44.3 mph
NCHRP 350-TL-3 Barricade - Test Level 3 Barricade with an impact speed of over 45mph